Specialists in small series and piece production.
Currently, we are looking for candidates for the following positions.
DN SOLUTIONS type DVF 5000
- Machine travel range: X 625 mm, Y 450 mm, Z 400 mm
- Table clamping area: ø 500 x 450 mm
- Spindle speed: 12,000 rpm
- Tool magazine capacity: 30 tools
- Rapid traverse rate: 40/40/40 m/min
- Load capacity: 400 kg
- Accuracy: ± 0.005 mm
- Workpiece probe: Renishaw
Puma 2600Y II
- Turning diameter: 376 mm
- Maximum workpiece length: 760 mm
- Spindle speed: 4,000 rpm
- Tool magazine capacity: 12 tools
- Driven tools
- Y-axis
- Rapid traverse rate: 30/30/10 m/min
Doosan DNM750 II L Vertical machining center
- Table clamping area 2 160 x 760 mm, Z = 950 mm
- Powerful and precise machining of workpieces
- Spindle 8 000 rpm, 21.8 kW
- 30 tools in the magazine
- Rapid traverses 24 m/min
- Siemens S828D control system
- Crane with a load capacity of 8 tons
DOOSAN DNM 5700s Vertical CNC machining center
- Travel in X axis - 1 050 mm
- Travel in Y axis - 570 mm
- Travel in Z axis - 510 mm
- Table dimensions - 1 300 x 570 mm
- ISO 40 spindle taper
- Spindle speed - 8 000 (12 000) rpm/min
- Spindle motor power in kW (Cont./S3 15%) 11 / 18.5
- Maximum load 1 000 kg
DOOSAN vertical CNC machining center type VCF 850 LSR II - 5 AX
- 4axis machine range 3 000 x 850 mm, Z = 800 mm
- Table load capacity 3 t
- 5 axis range diameter 800 mm
- Load capacity 1 t
- Spindle 12,000 rpm, 24/32 kW
- 60 tools in the magazine
- Crane with a load capacity of 8 t
- Accuracy ± 0.005 mm
- Renishaw workpiece probe
Vertical machining center with automatic pallet change DOOSAN type VC 510
- Machine range X 762 mm, Y 516 mm, Z 570 mm
- Table clamping area 860 x 570 mm
- Spindle speed 10,000 rpm
- 30 tools in the magazine
- Rapid traverse 40/40/32 m/min
Doosan PUMA 2600 LY II CNC lathe
- Maximum turning diameter: 376 mm
- Maximum turning length: 1 280 mm
- Minimum clamping diameter: 8 mm
- Number of controlled axes 4
- Circulating diameter above the bed: 780 mm
- Maximum diameter of turned bar: 81 mm
- Y-axis travel 105 (± 52.5) mm
- Chuck diameter 255 (10 ") mm
- Speed - 4 000 rpm
- Clamping - A2 - 8 ASA
- Engine power - 22 kW / 30 min
Mazak Nexus 250MS CNC lathe
- Turning diameter: 350 mm
- Maximum workpiece length: 500 mm
- C axis - driven tools
- Counterspindle
- Accuracy ± 0.005 mm
VS28 TW column drill
- Spindle taper MORSE 3
- Continuous speed change - frequency converter
- Speed range: 150 - 2500 rpm/min
- Spindle feed: manual, machine
- Drilling depth: 150 mm
- Headstock extension: 235 mm
- Motor: 1.5 kW
- Automatic thread cutting
- Work table size: 500 x 400 mm
- Distance between spindle and table: max. 735 mm
- Distance between spindle and base: 1 150 mm
